Company Case About 10L Cosmetic Mixing Tank Small Vacuum Emulsifier Homogenizer Mixer for Making Mayonnaise Body Lotion Mixing Machine
10L Cosmetic Mixing Tank Small Vacuum Emulsifier Homogenizer Mixer for Making Mayonnaise Body Lotion Mixing Machine
Introduction
1, This lifting and tilting internal and external Vacuum Cosmetic Homogenizing Emulsifying Mixer Machine,which can meet different technological demands.
2, The homogenizing structure is made through German technology. The machine adopts the imported double-end mechanical seal effect.The maximum emulsifying rotation speed can reach 3500 rpm and the high shearing fineness can reach 0.2-5 um.
3, The vacuum defoaming can make the materials meet the requirement of being aseptic . The vacuum materials vacuum sucking can avoid dust.
4, The main boiler lid can adopt lifting system, it is easy to clean and the cleaning effect is more obvious, the main boiler can adopt tilting discharge.
5, The boiler body is welded with 3 layer imported SS plate, tank body and pipes adopts mirror polish which meet the GMP standard.
6, According to process requirement, the tank body can heating and cooling the electric heating.
7, To ensure the stability of whole machine, the machine adopt the imported electric appliances which can meet the international standards.
Specific parameter requirements of emulsifier:
| 10L emulsifying pot | Specific parameters |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching water phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching oil phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Design capacity | 10L |
| Working capacity | 8L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Service life | Over 10 years |
| Homogenizer power | 0.55 KW |
| Homogenizer speed | 2800 |
| Homogenization mode | Upper homogenization |
| Lid opening method | Manual or electric |
| Heating method | Electric heating |
| Discharge method | Inclined discharge |
| Sandwich operating pressure | 0.3 MPa |
| Vacuum degree in the pot | -0.09 MPa |
| Overall dimensions (m) | 0.8*0.55*1.43 |
| Wearing parts | 1 year spare parts. spare parts |
| Warranty Period | More than 1 year |
| Installation and | The supplier is responsible for commissioning |
| Matching water phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Sandwich operating pressure | 0.3 MPa |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Down stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
| Matching oil phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Upper (lower) stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
