Product Details
Place of Origin: CHINA
Brand Name: Yuan
Certification: ISO9001
Model Number: ZJR-5/1300
Payment & Shipping Terms
Minimum Order Quantity: 1
Price: Provide according to demand
Material: |
STainless Steel 304 |
Design Capacity: |
10L |
Working Capacity: |
8L |
Heating Method: |
Electrically Heated |
Discharging Method: |
Tilt Unloading |
Vacuum In The Pot: |
-0.09 MPa |
Homogenizer Speed: |
2800 |
Homogenizer Power: |
0.55KW |
Material: |
STainless Steel 304 |
Design Capacity: |
10L |
Working Capacity: |
8L |
Heating Method: |
Electrically Heated |
Discharging Method: |
Tilt Unloading |
Vacuum In The Pot: |
-0.09 MPa |
Homogenizer Speed: |
2800 |
Homogenizer Power: |
0.55KW |
Small Scale 5L 10L 20L 30L Cosmetic Cream Vacuum Homogeneous Lab High Shear Emulsifying Mixer Machine
The Small Lab Scale 5L 10L 20L 30L Cosmetic Cream Vacuum Homogeneous Emulsifying Mixer Machine is applicable for a wide variety of viscosity product, i.e. emulsions and semisolid.
Especially cosmetic cream making machine the emulsifying effect is more prominent for materials of high base viscosity.
Cosmetic cream mixing machine integrates mixing, vacuuming, heating, cooling and homogenizing functions into single machine, resulting in a considerably reduction in cycle time.
1. Touch Screen Operate System
Operator through touch screen control the machine each part running
*With timing function
*With emergency stop function
2. Mixing & Homogenizing System
Scraping wall frame type and middle guide paddle two-way stirring.
*Contact material as SS304/316L
*Scraper material PTFE
*Mixing Speed:0~86r/min
*Homogenizing Speed:0~3000r/min
3. Material Adding System
Design for customer adding necessary raw material for further mixing and heating process.
-Customized by different type raw material like liquid or powder etc
Water & Oil Pots System
Design for some raw material do pre-heating and pre-mixing, then transfer to main tank do finial process.
-Used for proportioning ingredients
Specific parameter requirements of emulsifier:
| 10L emulsifying pot | Specific parameters |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching water phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching oil phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Design capacity | 10L |
| Working capacity | 8L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Service life | Over 10 years |
| Homogenizer power | 0.55 KW |
| Homogenizer speed | 2800 |
| Homogenization mode | Upper homogenization |
| Lid opening method | Manual or electric |
| Heating method | Electric heating |
| Discharge method | Inclined discharge |
| Sandwich operating pressure | 0.3 MPa |
| Vacuum degree in the pot | -0.09 MPa |
| Overall dimensions (m) | 0.8*0.55*1.43 |
| Wearing parts | 1 year spare parts. spare parts |
| Warranty Period | More than 1 year |
| Installation and | The supplier is responsible for commissioning |
| Matching water phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Sandwich operating pressure | 0.3 MPa |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Down stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
| Matching oil phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Upper (lower) stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
